Neula pistemerrkaukoneelle P 3D Stylus 3D kulma 60°

Item No. TECH77021
Neula pistemerrkaukoneelle P 3D Stylus 3D kulma 60°
Gravotech  3D stylus  is the stylus with the best amplitude on the market (16mm)! It marks from a distance of 2mm to 18mm from the part. Optimum setting distance is 10mm on a flat part Parts with a surface hard to reach (groove) without moving the marking head Several surfaces at different heights o
alv 0%
Varasto vähissä

Tuotekuvaus

Gravotech 3D stylus  is the stylus with the best amplitude on the market (16mm)! It marks from a distance of 2mm to 18mm from the part. Optimum setting distance is 10mm on a flat part

  • Parts with a surface hard to reach (groove) without moving the marking head
  • Several surfaces at different heights on the same part without any actuator or Z axis
  • Parts with non-flat surfaces or parts with slopes
  • Very easy integration when setting the final distance on the assembly line  
  • Silent: noise is reduced compared to any other pneumatic stylus
  • Economical: more than 3 times less air consumption than any other pneumatic stylus
  • Marks Deeper than a S2 stylus (but slightly slower)
  • Better Marking Quality for a Datamatrix than any standard pneumatic stylus

Tuotearviot (0)

Ei tuotearvioita.

Neula pistemerrkaukoneelle P 3D Stylus 3D kulma 60°

Neula pistemerrkaukoneelle P 3D Stylus 3D kulma 60°

Item No. TECH77021
Gravotech  3D stylus  is the stylus with the best amplitude on the market (16mm)! It marks from a distance of 2mm to 18mm from the part. Optimum setting distance is 10mm on a flat part Parts with a surface hard to reach (groove) without moving the marking head Several surfaces at different heights o
alv 0%
Varasto vähissä

Tuotekuvaus

Gravotech 3D stylus  is the stylus with the best amplitude on the market (16mm)! It marks from a distance of 2mm to 18mm from the part. Optimum setting distance is 10mm on a flat part

  • Parts with a surface hard to reach (groove) without moving the marking head
  • Several surfaces at different heights on the same part without any actuator or Z axis
  • Parts with non-flat surfaces or parts with slopes
  • Very easy integration when setting the final distance on the assembly line  
  • Silent: noise is reduced compared to any other pneumatic stylus
  • Economical: more than 3 times less air consumption than any other pneumatic stylus
  • Marks Deeper than a S2 stylus (but slightly slower)
  • Better Marking Quality for a Datamatrix than any standard pneumatic stylus

Tuotearviot (0)

Ei tuotearvioita.